Morbark 223 Stand-Alone Flail

223 Stand-Alone Flail

  • Morbark
  • Flails

Find Your Nearest Location

Your Preferred Store
Change location Change location
Request Quote
Key Features & Specs

The 223 Flail is designed to work in conjunction with chippers like the Morbark 30 Chiparvestor®, the 40/36 Whole Tree Drum Chipper or similar machines. With a large 56” x 23” (142.24 cm x 58.42 cm) infeed opening, the 223 accepts logs up to 23” (58.42 cm) in diameter at a feed rate from 70-150 feet per minute. The Morbark Integrated Control System allows for fine adjustment of feed rate and flail drum speed so that bark removal is maximized and removal of “good” fiber is minimized for superior end products.

  • Segmented Flail Drum - Segmented flail drum provides better wear life than traditional tubular style drums.
  • Large Engine/Hydraulic Inspection Area - Large dedicated work/inspection area gives easy access to engine and hydraulic components.
  • Drives - Kawasaki direct drive flail motors allow for adjustments of up to 700 RPM.
  • Adjustable Feed Rate and Flail Drum Speed - Morbark Integrated Control System allows for fine adjustment of speed so that bark removal is maximized and removal of “good” fiber is minimized.
  • + Expand All
  • - Close All
  • Specs - General

    Length (transport): 33’5” (10.18 m)
    Length (operating): 25’2” (7.67 m)
    Height (transport): 9’11”½” (3.04 m)
    Height (operating): 13’4” (4.06 m)
    Width: 9’10” (3 m)

    Gross weight (approximately): 46,700 lbs. (21,185 kg)

    Horsepower: 350 HP to 440 HP (262 kW to 328 kW)
    Engine: CAT

    Dual-axle Trailer: 45,000 lb. (20,411 kg) suspension

    Drive (flail): hydraulic
    Fuel capacity: 230 gallons (870 litres)
    Hydraulic oil capacity: 200 gallons (757 litres)

    Remote control

  • Specs - Flail

    Infeed opening: 56” x 23” (142.24 cm x 58.42 cm)

    One top hydraulically driven feed roller mounted on a yoke assembly

    Two stationary bottom hydraulically driven feed rollers

    Dual horizontal chain flail drums (one stationary bottom, one carried by a floating yoke) with segmented drums; each equipped with eight flail chain rods

    Discharge system consisting of 62” x 19” (157.48 cm x 48.26 cm) opening and 61”½” x 11”½” (156.21 cm x 29.21 cm) hydraulically powered ram

    Flail Drum Speed: Adjustable from 0 to 700 RPM

    Feed Rate: Adjustable from 70 to 150 ft/min

  • Specs - Options
    • ESPAR heating system for cold weather start
    • Caterpillar and Strickland track undercarriage options