• + Expand All
  • - Close All
  • Specs - Chipper Assembly

    Drum diameter:  36” (91.44 cm)
    Drum width: 43 ½” (110.49 cm)
    Chipper knives: (8) 11” x 7 5/16” x ¾” thick (27.94 cm x 18.57 cm x 1.9 cm)
    Counter knives: (8) 11” x 6 3/8” x ½” thick (27.94 cm x 16.19 cm x 1.27 cm)
    Knives and Counter knives are Babbitt-style and made of A-8 modified steel
    Drum speed: 968 RPM
    Feed drive: Hydraulic


  • Specs - Infeed System

    Infeed opening: 40” x 39” (101.6 cm x 99.06 cm)

    Infeed System consists of one 30” (76.2 cm) diameter top compression feed roll with internal drive, a 14” (35.56 cm) diameter bottom feed wheel and a 40” wide x 12’6” (101.6 cm x 2.89 m) long live floor equipped with three strands of WDH-120 chain in a staggered configuration.


  • Specs - Discharge System

    Straight discharge chute includes hydraulically operated chip deflect with vertical and horizontal adjustment, clean-out door and an additional 18” (45.72 cm) top section.


  • Specs - Cab and Loader (optional)

    Model 250 Hydraulic Knuckleboom Loader with 23” (7 m) extended boom reach, turntable bearing with 280-degree swing, 2537 log grapple with 360-degree turn motor. Stationary rising operator’s cab and console, complete with joystick controls for loader, Red Dot combination air conditioner/heater, cab-mounted MICS, engine gauge panel, emergency shut-down system, six-way adjustable swivel seat, color-tinted safety glass with steel guard


  • Specs - Remote

    Wireless remote control with 60” (18.28 m) tethered remote back-up system for chipper operation. Functions include forward/reverse of feed works, up and down of top feed roll, operation of chip discharge chute and throttle.


  • Specs - Options
    • Microchip configuration with chip accelerator and forestry grate
    • Chip accelerator
    • ESPAR heating system for cold-weather start
    • Top load discharge
    • 320L Caterpillar undercarriage
  • Specs - General

    Length NCL: 37’5” (11.4 m)
    Height NCL: 12’5” (3.78 m)
    Width NCL: 8’6” (2.59 m)

    Length NCL Track: 32’8” (9.95 m)
    Height NCL Track: 11’6” (3.5 m)
    Width NCL Track: 9’10” (2.99 m)

    Length WCL Track: 32’10” (4.21 m)
    Height WCL Track: 11’11” (3.63 m)
    Width WCL Track: 11’6” (3.5 m)


    Gross weight NCL: 54,500 lbs. (27,720 kg)
    Axle weight NCL: 31,750 lbs. (14,400 kg)
    Tongue weight NCL: 22,750 lbs. (10,320 kg)

    Gross weight NCL Track: 58,580 lbs. (26,571 kg)
    Gross weight WCL Track: 65,860 lbs. (28,875 kg)


    Engine: CAT
    Horsepower: 755 HP to 875 HP (563 kW to 652 kW)


    Fuel capacity (tank): 300 gallons (1,135 litres)
    Hydraulic oil capacity: 187 gallons (708 litres)


    Chipping capacity: 23” (58.42 cm)


    Brakes: air

    Towing arrangement: fifth wheel

    Dust suppression system

    Hydraulically operated debris containment door

    Automatic reversing fan system

    Rear hydraulic stabilizers

    Light package

    11 HP (8.2 kW) air compressor with lockable enclosure