Morbark 3200 Wood Hog Horizontal Grinder
  • + Expand All
  • - Close All
  • Specs - Discharge System

    Discharge system consists of a hydraulically driven, horizontal 42” x 17’9” (106.8 cm x 5.4 m) aggregate belt conveyor discharging onto a 36” (91.44 cm) stacking conveyor with hydraulic fold for transport.


  • Specs - Hammermill and Grates

    28” x 58”1/2” (71.12 cm x 149 cm) Hammermill system constructed of heavy-duty 17 5/8” (44.8 cm) diameter rotor, 16 1 1/8” (2.86 cm)-thick two-piece laser-cut rotor plates to ensure precision and enforce steel strength. The plates are keyed on a 5 7/8” (14.92 cm) diameter shaft with 3 15/16” (10 cm) bearings on both ends of the rotor and eight 2” (5.08 cm) hammer retaining rods. Hammermill pattern has 18 2” (5.08 cm) balanced forged heavy-duty hammers, 18 3 1/16” (7.8 cm) wide double-edged replaceable inserts and 18 rakers.


  • Specs - Options
    • Electric power
    • 12-knife chipper drum assembly
    • Variety of grates sizes available
    • Hydraulic rod puller
    • 320L Caterpillar undercarriage
  • Specs - Infeed System

    Infeed opening: 57”1/2” x 38” (145 cm x 96.5 cm)

    Variable speed infeed system consists of one 30” (76.2 cm) diameter top compression feed roll with internal drive and a 16” long x 57”1/2” (4.87 m x 146 cm) wide live floor equipped with four strands of WDH-110 chain in a staggered configuration.


  • Specs - General

    Length wheeled (transport): 38’2” (11.63 m)
    Length wheeled (operating): 57’9” (17.6 m)
    Height wheeled (transport): 12’7” (3.83 m)
    Height wheeled (operating): 16’1/4” (4.95 m)
    Width wheeled: 8’4” (2.54 m)

    Length tracked (transport): 35” (10.67 m)
    Length tracked (operating): 54’8” (16.66 m)
    Height tracked (transport): 12” (3.66 m)
    Height tracked (operating): 16’2” (4.93 m)
    Width tracked: 10’9” (3.28 m)


    Gross weight wheeled: 54,000 lbs. (24,494 kg)
    Axle weight: 34,000 lbs. (15,422 kg)
    Tongue weight: 20,000 lbs. (9,071 kg)

    Gross weight tracked: 70,000 lbs. (31,751 kg)


    Engine: CAT
    Horsepower: 540 HP to 765 HP (402 kW to 570 kW)


    Fuel capacity (tank): 300 gallons (1,135 litres)
    Hydraulic oil capacity: 100 gallons (378 litres)


    Screen Area: 3,215 sq in (20,742 sq cm)


    Brakes: air
    Towing arrangement: fifth wheel


    Hydraulically operated debris containment door
    Remote control with tethered back-up system
    Hydraulic oil cooler

    Externally adjustable break-away torque limiter Dust suppression system

    11-HP (8.2 kW) air compressor with lockable enclosure

    Magnetized end pulley with collecting slide tray for ferrous metal removal

    Automatic reversing fan system