Morbark 2455 Stand-Alone Flail
  • + Expand All
  • - Close All
  • Specs - Infeed System

    Heavy-duty spreader feed system with 24” x 55” (60.96 cm x 139.7 cm) infeed opening, consisting of three top feed rolls with synchronized feed rates, mounted on yoke assemblies. The center yoke assembly contains the top flail drum, which hydraulically raises for various diameter wood. Pinch points are 85” (215.9 cm) from the back yoke wheel to the center yoke wheel and 85” (215.9 cm) from center to the front yoke wheel. There are two stationary hydraulically driven bottom feed rolls and a 40” wide x 8” (101.6 cm x 2.44 m) long outfeed conveyor.


  • Specs - MICS

    MICS (Morbark Integrated Control System) monitors hydraulic pressures, temperatures,  engine parameters, controls auto-reversing fan functions, feed functions and allows utilization of remote diagnostic system.


  • Specs - General (4-flail option)

    Length: 48’8” (14.83 m)
    Height: 14’5” (4.39 m)
    Width: 11’5” (3.48 m)


    Gross weight (with loader): 97,340 lbs. (44,153 kg)
    Rear axle weight: 52,160 lbs. (23,659 kg)
    Tongue weight: 45,180 lbs. (20,493 kg)


    Engine: CAT
    Horsepower: 755 HP (563 kW)
    Electric powered units also available


    Fuel capacity (tank): 240 gallons (908 litres)
    Hydraulic oil capacity (flail): 200 gallons (757 litres)
    (feed system & loader): 300 gallons (1,135 litres)

    11 HP (8.2 kW) air compressor with lockable enclosure

    Radio and tethered remote control

     


    Tires: 11Rx22.5×16-ply radial

    Brakes: air

    Tandem axle or tri-axle trailer: fifth wheel


  • Specs - Options
    • Model 500 knuckleboom loader with 442 log grapple, 360 degree Rotobec turn motor and rotating operator’s cab in lieu of remote control
    • Additional third flail drum
    • Push ram discharge in lieu of standard discharge
    • Foot pedal loader swing for knuckleboom loader
    • ESPAR heating system for dual engine option
  • Specs - Discharge

    Discharge system consisting of 72” wide x 23” (1.83 m x 7.01 m) long telescoping drag chain conveyor with  hydraulic drive. Debris is bottom discharged into dual 12” (30.48 cm) diameter twig augers.