Key Features & Specs
Cost-conscious and high-performance
A rugged housing combined with full-wave GNSS tracking, this antenna has been designed for tracking all currently broadcast signals as well as those planned for the future. This low-cost alternative to Topcon’s CR-G5 high-accuracy infrastructure antenna fits almost any budget yet yields high-quality results at the same time due to its all-in-view tracking of every constellation and signal available today and coming in the future.
- All-in-view satellite signal tracking
- Entry-level, low-cost, high-quality geodetic campaign antenna
- Designed for highly efficient multi path reduction
- Ideal for portable geodetic market requirements
- Full-wave, zero-centered geodetic reference station antenna
Specifications
Noise Figure: | 1.0 |
Out-of-Band Rejection: | Upper band: (1510...1660 MHz) |
Power Consumption: | 65 mA (typical) |
Out-of-Band Rejection: | Lower band: (1100...1380 MHz) -30 dBc (typical) |
Dust / Humidity: | IP67 IEC 60529 |
Drop Test: | Drop with pole from 2 m onto concrete surface |
Dimensions: | 298 x 75 mm (antenna) |
LNA Gain: | 35 dB (typical) |
Input Voltage: | 3 to 16 VDC |
Nominal Impedance: | 50 Ohm |
Gain Roll-Off (from Zenith to Horizon): | Lower band: 13 dB |
Gain Roll-Off (from Zenith to Horizon): | Upper band: 10 dB |
Connector: | TNC female |
Differential Propagation Delay (typical): | 6 ns (maximum) |
RoHS Compliant: | Yes |
Weight: | 1.3 kg |
Out-of-Band Rejection: | f < 1000 MHz: -50 dBc (typical) |
Operating Frequency Range: | Upper band: 1570±40 MHz (E2, B1, L1, B1-2, E1, G1, SBAS) |
Operating Temperature: | -40°C to 75°C |
Out-of-Band Rejection: | f > 1800 MHz: -50 dBc (typical) |
Gain at Zenith (90º): | Lower band: 5.5 dBic (minimum) |
VSWR: | ≤ 2.0 : 1 |
Operating Frequency Range: | Lower band: 1230±70 MHz (E5a, L5, E5b, G3, B2, E3, L2, G2, E4, B3, E6) |
Gain at Zenith (90º): | Upper band: 4.5 dBic (minimum) |
Storage Temperature: | -40°C to 80°C |