
210L EP Tractor Loader
- John Deere
- Tractor Loaders
Find Your Nearest Location
Key Features & Specs
- Net Power: 52 kW (70 hp) @ 1900 rpm
- Operating Weight: 4794 kg (10,569 lb.)
- Breakout Force: 38.7 kN (8,700 lb.)
- Lift Capacity: 2466 kg (5,432 lb.)
- Net Power 52 kW (70 hp)
- Operating Weight 4,794 kg (10,569 lb.)
- Breakout Force 38.7 kN (8,700 lb.)
- Lift Capacity 2,466 kg (5,432 lb.)

- + Expand All
- - Close All
-
Mechanical-Front-Wheel Drive
Mechanical-front-wheel drive (MFWD) and differential lock can be engaged on-the-go to give extra traction in poor underfoot conditions or for moving heavy loads. Optional limited-slip front axle delivers 65 percent of available power to the tire with the best traction. For true all-wheel-drive pulling power.
-
Engine
The 210L EP IT4/Stage IIIB emission-certified PowerTech™ E engine requires no aftertreatment.
No diesel particulate filter (DPF) is needed on either model, reducing downtime and expense.
Suction-type cooling fan is standard; optional viscous variable-rate (temperature-controlled) fan boosts rated engine power to 55 kW (73 hp).
-
Eco Mode
Standard economy mode helps maximize fuel usage in lighter-work applications with minimal effect on machine performance.
-
Ride Control
With ride control activated, front loader hydraulic cylinders act as a shock absorber, smoothing travel over rough terrain, helping full loads reach their destination, and reducing operator fatigue.
-
Productivity
New hitch design makes it easier to position the box blade over the pile for more versatility and productivity.
Integral three-point hitch accommodates a variety of tools
-
Operator Comfort
Choose cab or open operator station.
Higher canopy with wider and lower step provides better visibility over the hood and to the corners of the front bucket, as well as to the rear box blade. Makes it easier to service under-canopy components, too.
-
Easy Maintenance
Two-position tilt hood provides same-side ground-level access to engine and transmission dipsticks, engine-oil fill, fuel and air filters, and coolant reservoir. Fuel fill is also closely convenient.
CAPACITIES
Fuel tank capacity, ltr (gallons (US)) | 117.3 (31) |
Hydraulic tank capacity, ltr (gallons (US)) | 45 (11.9) |
Shovel cap SAE heaped, m� (yd�) | 0.86 (1.12) |
Alternator capacity, Amp | 120 Cab Option |
DIMENSIONS
Overall length, mm (ft/in) | 5310 (17 ft 5 in) |
Minimum transport height, mm (ft/in) | 2640 (8 ft 8 in) Cab Height |
Overall width, mm (ft/in) | 2130 (7 ft ) |
Std shovel width, mm (inches) | 2184 (86) |
Dump Clearance @ 45 deg, mm (ft/in) | 2740 (9 ft ) |
Dump Reach, mm (inches) | 699 (27.5) |
Bucket Hinge Pin - Max Height, mm (ft/in) | 3340 (10 ft 11 in) |
Coupler | Optional Worksite Pro Hydraulic |
DRIVELINE
Engine manufacturer | John Deere |
Engine model | PowerTech E 4045HT072 |
Emission rating | Interim Tier 4 |
Displacement, ltr (Inches�) | 4.5 (276) |
Rated speed, rpm | 2100 |
Net output, kW (hp) | 55 (73) Viscous Fan Option |
Transmission type | Power Shift |
Number of speeds - forward | 4 |
Number of speeds - reverse | 2 |
Front axle type | Mechanical FWD |
Service type | Wet Multi Disc |
Service actuation | Hydraulic w/Power Assist |
PERFORMANCE
Max. Forward Speed, kph (mph) | 31.7 (19.7) |
Max. Reverse Speed, kph (mph) | 12.9 (8) |
Lift Capacity to Full Height, kg (lbs) | 2466 (5432) |
Oscillation angle, � � | 22 |
Breakout force std shovel, kN (lbf) | 38.7 (8700) |
System voltage, V | 12 |
Pump type | Gear |
Pump flow, lt/min (gallons (US) / min) | 78 (20.5) |
System pressure, bar (PSI) | 189.6 (2750) |
WEIGHTS
Operating weight, kg (lbs) | 4794 (10569) |
Documents
