Motor Grader 695

  • Leeboy
  • Leeboy Motor Graders

Find Your Nearest Location

Find Location
Your Preferred Store
Change location Change location
Request Quote
Key Features & Specs
  • Weight 17,960 lbs (8,146.5 kg)
  • L 21’ 4” (6.50 m) W(shipping): 7’ 8” (2.33 m) H: 9’ 7” (2.90 m)
  • Tier 3 - 110 hp (82 kw) @ 2,100 RPM
  • + Expand All
  • - Close All
  • Blade Range:

    Lift above ground: 12” (.304 m)
    Pitch at ground: 45” tilt
    Blade slide: 36” (.914 m) left or right

  • Dimensions:

    Length: 21’ 4” (6.50 m)
    Width (shipping): 7’ 8” (2.33 m)
    Height: 9’ 7” (2.90 m)
    Wheelbase (front tire to mid-tandem) : 15’ 3” (4.66 m)

  • Engine:

    Tier 3 - 110 hp (82 kw) @ 2,100 rpm Cummins turbo diesel engine
    Water-cooled, EPA certified
    4 cylinders, 270 cid (4.4 l)
    Electric start
    Fuel reservoir: 35 gallons (132 l)
    Hydraulic system: 21 gallons (79 l)

  • Moldbaord:

    Length: 10’ (3.04 m)
    Height: 21” (.533 m), controlled by two hydraulic cylinders mounted to ball joints at turntable
    Cutting edge thickness: .625” (16 mm)
    Replaceable end bits and cutting edge standard equipment
    Cuts 17” (.43 m) below grade

  • Front Axle:

    Fully welded steel, tubular design
    Oscillation: 40” total, supported by tapered roller bearings and bushings
    Wheel lean: 10” left or right (20” total)
    Clearance: 22” (.559 m)

  • Tires:

    Six 15 x 19.5, TL, G-2
    8 ply
    Pneumatic tires

  • Blade Lift Mechanism:

    Each trunnion is mounted to the frame by dual tapered roller bearings in sealed housings

  • Operators Area:

    Fully cushioned, adjustable suspension seat with seat belt
    Adjustable console controlling left and right-hand blade lift, front blade lift, moldboard side shift, moldboard tilt, circle turn, circle shift, articulation, front wheel lean and rear mount attachment control
    Console provides the operator control of steering
    All gauges are easily readable

  • Options:

    Water jacket heater
    Rear mount scarifier (in lieu of front)
    7’ (2.13 m) front blade with 4 shank scarifier
    8’ (2.43 m) front blade with 4 shank scarifier
    11’ (3.35 m) moldboard
    12’ (3.65 m) moldboard
    Foot accelerator
    Front tow hitch on blade [must order 7’ (2.13 m) or 8’ (2.43 m) front blade]
    - Foot operated FNR pedal

  • Drawbar:

    4” (101.6 mm) x 4” (25.4 x 101.6 mm) solid

  • Weight:

    Total weight: 17,960 lbs (8,146.5 kg)
    Rear: 12,600 lbs (5,715.2 kg)
    Front: 5,360 lbs (2,431.2 kg)

  • Training, Support and Company:

    Training and support manuals
    Optional on-site operator training by Dealer
    One-year, unlimited hours warranty against any manufacturer defects
    Extended warranty available
    50+ years manufacturing experience
    ISO 9001 Certified
    Manufactured in the USA

  • Brakes:

    Foot operated primary and service brakes
    Secondary brake accomplished by dynamics of hydrostatic traction drive system
    Hydraulic parking brakes, internal element of the planetary final drive unit, actuated by a selector valve
    Spring applied parking brakes automatically actuated when the ignition switch is in off position

  • Battery:

    Two 12 volt batteries

  • Moldboard Turntable:

    Circle centered with three adjustable alignment blocks with removable shims
    Diameter: 3’ 3” (.838 m)
    Circle rotates 90” by two hydraulic cylinders

  • Traction Drive:

    Hydrostatic drive using a hydrostatic pump, drives a variable displacement hydrostatic motor that powers a two-speed tandem axle
    Variable volume hydrostatic drive system provides infinite speed selection in each of the two speed ranges
    Working range: @ 2,100 rpm 0-10 mph (0-16 mph)
    Travel range: @ 2,100 rpm 0-20 mph (0-32 kph)
    Tandem oscillates ± 15”
    Choose between tandem and all-wheel drive
    Dana style gear tandem driven, not chain

  • Additional Standard Equipment:

    Moldboard float control
    Fail safe brake
    Backup alarm
    Front and rear turn signals
    Four-way flashers
    Head lights and work lights
    Full fabricated cab , includes heater, defroster, air conditioner, radio, front and rear window wipers
    Audible warning low oil and water temperature
    Safety beacon
    Horn
    Cup holder
    Vandalism package

  • Instrumentation:

    Fuse panel
    Fuel gauge
    Voltmeter
    Engine oil pressure gauge
    Hour meter
    Tachometer
    Automatic shutdown for low oil pressure or high water temperature
    Hydraulic oil level, sight gauge with temperature
    Air filter restriction indicator

  • Articulated Frame:

    Steel channel, rectangular tubing
    Articulated 24”
    Pivot 4” (101.6 mm) diameter, supported by 4 tapered roller bearings
    Turning radius: 21’ 5” (6.527 m) from center to outside front tire with frame articulated